此页面上的内容需要较新版本的 Adobe Flash Player。

此页面上的内容需要较新版本的 Adobe Flash Player。

  Upward continuous casting line
  Continuous casting &rolling line
  Al Al Alloy
  Rod breakdown machine
  Cu Cu Alloy
  Hydraulic drawing bench
  Straightening &cutting machine
  Horizontal wrapping machine
  AS8/700 Drawing Production Line
 
 

LFD - 1000 Rod Break Down Machine
Application:
The machine is applied for drawing Ф8.8 ~ Ф14.4mm Copper, Cu-Mg, Cu-Ag and Cu-Sn alloy trolley wire.
Main Features:
>> Every drawing block is driven by moment motor separately, the wire slippage is very little on the drawing block’s surface,and meanwhile the wire is winded several circles, so the surface quality of the trolley wire is very fine.
>> All inner of drawing block and outer of drawing die-stand are cooled by circle water to control the temperature of trolley wire.
>> The surface of drawing blocks is coated with tungsten carbide power which is strong in hardness and wear proof, having long life span. Tungsten carbide surface and down-lead ring ensure the surface quality of trolley wire.
>> Take-up adopts isochronous moving bobbin, so the trolley wire doesn’t deflect.
>> Main technical parameters are set and changed on the touch screen, advanced in technology and easy in operation.
 

Inlet wire ( mm )

Ф20 - Ф32

Outlet wire ( mm )

Ф8.8 - Ф14.4

Max。 Speed of outlet wire ( m/s )

1.0

Drawing block ( mm )

Ф1000

Drawing Pass

5

Reduction of section area each step

17 - 32%

Elongation of section area each step

20 - 47%

 
牛娃彩票平台 众盈网彩票平台 牛8彩票平台 广东11选5 广东11选5 九一彩票平台 广东11选5 万豪彩票平台 胜兴彩票平台 新皇彩票平台